What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold Demolition Man £1600

crsedgar

Site Supporter
5Years
Joined
Jun 12, 2016
Messages
867
Location
DUNDEE
For sale is my Demolition Man, since receiving BSD and Taxi its time to move this on.

Good Points:
Was fully stripped and cleaned when I received the machine which was a few years ago now but has had minimal home use since.

Machine is complete.

LEDs fitted to GI, Backbox and Playfield Inserts, only Flashers remain as incandescent.

I rebuilt all 3 flippers last year including new coils.

New replacement DMD fitted working 100%.

Just finished cleaning the main playfield area with Treasure Cove power cut and wax and looks great and plays really fast.

Included are some spares;
Spare Trigger handle (right hand side)
Elevator motor
Claw Motor

Includes original manual.

Recently repinned GI male connector and replaced female connector as couple of pins had signs of heat damage and some GI lamps were not working, now all lamps are working.

Remote battery holder fitted.

Leg protectors fitted (blue)


Bad Points:
Some playfield wear on two of the multiball decals

Handles have wear.

Cabinet has some dings mostly concentrated on the backbox sides, no fading.

Coin door has couple of drilled holes for a security mech.

Translite is not perfect due to two small marks but you really can't notice them as they are on less prominent areas.

Location:
Machine located in Dundee and I appreciate that's a bit far for most but Martin does venture up here every so often. Alternatively since I am donating some machines to Play Expo in Glasgow (17th 18th June) I could see about getting DM on the lorry and have it collected from Glasgow.

You may notice the backbox does not have a lock in the pictures, I will be adding one before shipping.

Regards
Chris

IMG_20170607_150544.jpg
IMG_20170607_150552.jpg
IMG_20170607_152457.jpg
IMG_20170607_150620.jpg
IMG_20170607_150538.jpg
IMG_20170607_150713.jpg
IMG_20170607_150603.jpg
IMG_20170607_152627.jpg
IMG_20170607_150624.jpg
IMG_20170607_152452.jpg
IMG_20170607_152636.jpg
IMG_20170607_150612.jpg
IMG_20170607_004633.jpg
IMG_20170607_004655.jpg
IMG_20170607_004618.jpg
IMG_20170607_004644.jpg
IMG_20170607_004708.jpg
IMG_20170607_004626.jpg
IMG_20170607_004719.jpg
IMG_20170607_004726.jpg
IMG_20170607_135225.jpg
IMG_20170607_135243.jpg
IMG_20170607_135546.jpg
IMG_20170607_135538.jpg
IMG_20170607_135551.jpg
IMG_20170607_135607.jpg
IMG_20170607_135559.jpg
IMG_20170607_135247.jpg
IMG_20170607_135232.jpg
IMG_20170607_135238.jpg
IMG_20170607_135531.jpg
IMG_20170607_135614.jpg
 
The missing pics from initial post;

IMG_20170608_204617.jpg
IMG_20170608_204623.jpg
IMG_20170608_204344.jpg
IMG_20170608_204353.jpg
IMG_20170608_204359.jpg
IMG_20170608_204611.jpg
IMG_20170608_204606.jpg
 

Attachments

  • IMG_20170608_204348.jpg
    IMG_20170608_204348.jpg
    190 KB · Views: 19
  • IMG_20170608_204320.jpg
    IMG_20170608_204320.jpg
    150.2 KB · Views: 19
  • IMG_20170608_204640.jpg
    IMG_20170608_204640.jpg
    97.3 KB · Views: 20
  • IMG_20170608_204312.jpg
    IMG_20170608_204312.jpg
    70.9 KB · Views: 20
Played this table at our last meet, it played well and looked good to me.

Good luck with the sale.

Chris
 
My Demolition Man will be at NERG, try before you buy, saves you a round trip to Bonnie Dundee!
 
Forgot to ask how did you get the shine on the playfield??? was it clearcoated or waxed to death ?

Cheers

kev
 
Hi Kev

I used Treasure Cove Power Cut and the Treasure Cove Wax, I can't remember if I finished it off with Carnauba wax or not. Treasure Cove is a bit pricey but it does go a long way and with the drill attachments saves a helluva lot of elbow grease and the results are amazing, it's exceptionally good at restoring dull mylar.

Also the GI LEDs were from http://www.pinball-led.co.uk in case you were wondering, I did try red on the lower playfield but it didn't do it for me so went back to warm white.

Cheers
Chris
 
yeah got the GI bit lol !! yeah I have gone for cool white in the whole playfield GI, but dont know what it looks like yet until I finish the restore

Cheers

Kev
 
This machine got a lot of plays over the weekend and didn't have any problems, when someone buys it they'll have a great pin.
 
Back
Top Bottom