Please read whole ad for all details.
Interested in the following, roughly in order of preference, +/- cash as appropriate.
Stranger Things - my top pick but there are a couple of other wanted ads for this if you want cash or a TMNT
Elvira HoH
Avengers Infinity Quest
Guardians of the Galaxy
Lord of the Rings
The Walking Dead
Batman 66
Deadpool Pro HUO, 375 lifetime plays. Build date May 2022, bought NIB from Pinball Heaven.
Lucxor katana handle
Pin Monk colour mode and multiplier brackets
Titan rubbers throughout except factory posts (one post rubber next to lil DP drops has been rotated already due to wear)
Col's plastic protectors - slings and return lanes
Replaced flipper coil stops
Normal playfield dimpling
Came out the box with a little bit of cosmetic damage to the front bottom edge of the cab to the black paper stuff before the vinyl starts and at the back of the cab at the top and bottom edges, please see photos
During the first approx 250 games I had 3 random machine resets. After the 3rd one I re-seated both sd cards, checked all connections and pushed in all molex connectors in the cab, backbox and under the playfield. I’ve played around another 125 games since doing this and had no further resets, so hopefully the issue was just due to a wonky sd card/ loose connection somewhere. There’s a chance it’s something else (possibly the cpu) and it has just not occurred again yet. Although warranties are not transferable Phil at Pinball Heaven has very kindly agreed that he will honour this one fault on this machine if it’s still an issue.
I think my photos show everything but if you want some more or have any questions just ask.
Interested in the following, roughly in order of preference, +/- cash as appropriate.
Stranger Things - my top pick but there are a couple of other wanted ads for this if you want cash or a TMNT
Elvira HoH
Avengers Infinity Quest
Guardians of the Galaxy
Lord of the Rings
The Walking Dead
Batman 66
Deadpool Pro HUO, 375 lifetime plays. Build date May 2022, bought NIB from Pinball Heaven.
Lucxor katana handle
Pin Monk colour mode and multiplier brackets
Titan rubbers throughout except factory posts (one post rubber next to lil DP drops has been rotated already due to wear)
Col's plastic protectors - slings and return lanes
Replaced flipper coil stops
Normal playfield dimpling
Came out the box with a little bit of cosmetic damage to the front bottom edge of the cab to the black paper stuff before the vinyl starts and at the back of the cab at the top and bottom edges, please see photos
During the first approx 250 games I had 3 random machine resets. After the 3rd one I re-seated both sd cards, checked all connections and pushed in all molex connectors in the cab, backbox and under the playfield. I’ve played around another 125 games since doing this and had no further resets, so hopefully the issue was just due to a wonky sd card/ loose connection somewhere. There’s a chance it’s something else (possibly the cpu) and it has just not occurred again yet. Although warranties are not transferable Phil at Pinball Heaven has very kindly agreed that he will honour this one fault on this machine if it’s still an issue.
I think my photos show everything but if you want some more or have any questions just ask.
