DE SW with pinsound has even me stumped.

[Skippy]

Hello All,

Before i throw this out of the window i thought i would ask for some advice.
Got my new pinsound board installed into DE SW all ok.
Put USB stick in with ZIP file downloaded (julien42 version) of sounds.
Board goes through conversion, conversion sounds play..10% 20% all complete.
Restart the pinball, pinsound plays the beeps, does the start up tune, then nothing nadda no games sounds.
Checked ribbon cable tried it both ways.
Tried 2 differrent USB sticks, with 3 different zip files, same result.
Tried copying data and structure to usb...didn;t like that complains of no WAV files.
Upgraded firmware on pinsound board...tried again...same result does conversion...plays startup then zippo.
Took pinsound out, put original sound board back in...game sounds run a treat.
So....i'm wondering do i have a fooked pinsound board.
Not sure if this is relevant but have a Rottendog power board but Data East MPU.
Fuses all good on the pinsound board
Orange LED flashes when playing game so assume it must be getting data to the board.
I cannot have 3 rubbish zip files surely?
Any help appreciated as currently i have spent all afternoon on this bugger.
Cheers
Skippy.

 

[Spandangler]

I think @Matt Adams had issues with this. Not sure how he resolved it, perhaps he'll chime in

 

[Skippy]

FIXED!
Simples!
Turn the volume control up to max (the one inside the table on the right hand side) which i knew nothing about.
I am now one happy pinhead!