BrianSoton Site Supporter Joined Aug 7, 2018 Messages 519 Location Southampton Jul 12, 2023 #1 Wanted coin door wiring loom for a Data East pinball, using a C220 type coin mech set up, including compatible coin interface board that mounts on back of coin door if possible.
Wanted coin door wiring loom for a Data East pinball, using a C220 type coin mech set up, including compatible coin interface board that mounts on back of coin door if possible.
steve brum Site Supporter Joined Feb 15, 2015 Messages 6,286 Location Nuneaton Jul 12, 2023 #2 I have the boards but not the looms unfortunately
steve brum Site Supporter Joined Feb 15, 2015 Messages 6,286 Location Nuneaton Jul 12, 2023 #3 Scrub that . I'll check my box of various coin stuff in the next hour or so
OP OP BrianSoton Site Supporter Joined Aug 7, 2018 Messages 519 Location Southampton Jul 18, 2023 #4 Bump