I have a few pins stored at my office that is closing soon so need to move these on.
This has had very little use since i have owned it, tested yesterday and all seems to work fine.
The pics are not great i can take more if needed.
Good points
Fully working - no faults reporting
Original manuals included.
New rubbers and Playfield Insert LED's fitted
Plastics are all there, some minor cracks in a couple
Original boards. Fitted with NVRAM, so no requirement for batteries
Original display, no faults / no dead pixels / no lines missing
Backbox Fitted with All LED's, including the flashers
Translite in great condition
Factory fitted shaker motor is also installed.
New legs
Not so good
A couple of times when i have powered up after being off for days its taken a while to come one, the sounds seems to play on a loop and it seemed to warm up then it was fine, it doesnt do this every time you start it but happend a couple of times now. It seems to be when its cold as the machine is currently in an office thats not heated.
Some marks and scuffs to cabinet, been repainted in areas not that well
Few Scratchs to playfied glass
Coin door is bit tatty
Few broken plastics
Tag button housing cracked
Rust on side rails
Bolts on lockdown bar
Price is£3500 Reduced £2700 NOW SOLD
Im in Northampton, Martin Retro Logistics has been to me a few times.
This has had very little use since i have owned it, tested yesterday and all seems to work fine.
The pics are not great i can take more if needed.
Good points
Fully working - no faults reporting
Original manuals included.
New rubbers and Playfield Insert LED's fitted
Plastics are all there, some minor cracks in a couple
Original boards. Fitted with NVRAM, so no requirement for batteries
Original display, no faults / no dead pixels / no lines missing
Backbox Fitted with All LED's, including the flashers
Translite in great condition
Factory fitted shaker motor is also installed.
New legs
Not so good
A couple of times when i have powered up after being off for days its taken a while to come one, the sounds seems to play on a loop and it seemed to warm up then it was fine, it doesnt do this every time you start it but happend a couple of times now. It seems to be when its cold as the machine is currently in an office thats not heated.
Some marks and scuffs to cabinet, been repainted in areas not that well
Few Scratchs to playfied glass
Coin door is bit tatty
Few broken plastics
Tag button housing cracked
Rust on side rails
Bolts on lockdown bar
Price is
Im in Northampton, Martin Retro Logistics has been to me a few times.
Attachments
-
20230114_140741.jpg177.9 KB · Views: 332
-
20230114_135836.jpg142.7 KB · Views: 326
-
20230114_135843.jpg227.5 KB · Views: 310
-
20230114_135847.jpg81 KB · Views: 336
-
20230114_135856.jpg176.5 KB · Views: 327
-
20230114_135905.jpg114.3 KB · Views: 332
-
20230114_135914.jpg89.7 KB · Views: 342
-
20230114_135924.jpg189.4 KB · Views: 351
-
20230114_140034.jpg189.5 KB · Views: 354
-
20230114_140035.jpg191.8 KB · Views: 330
-
20230114_140042.jpg204.9 KB · Views: 316
-
20230114_140049.jpg192.1 KB · Views: 312
-
20230114_140550.jpg200.3 KB · Views: 279
-
20230114_140554.jpg195.1 KB · Views: 268
-
20230114_140556.jpg253.6 KB · Views: 239
-
20230114_140559.jpg195.7 KB · Views: 228
-
20230114_140733.jpg161.9 KB · Views: 210
-
20230114_141452.jpg89 KB · Views: 191
-
20230114_141502.jpg264.5 KB · Views: 184
-
20230114_143353.jpg398.8 KB · Views: 295
Last edited: