Data East Star Wars - Coin Control Unit & Circuit board

[Marble Madness]

Hi all I'm trying to bring the last part of my Star Wars back to life however the coin door seems to missing some parts. Looking at my LW3 it's missing the credit control unit and the circuit board. Is anyone able to advise where these can be purchased from, I've trawled the Internet with no luck. Or if anyone has a spare of each that they are willing to sell to a good home!

Thanks in advance for any help

 

[PinballDaze]

I sell the interface board ( mk 2)
www.pinballdaze.co.uk

 

[Marble Madness]

Thanks for the reply. Should this interface be used in conjunction with the coin control unit as in the image. Or has this been adapted by an operator when originally purchased? My thinking is that the machine is wired to the interface and then a wire connects into the coin mech itself directly. If this is the case do you also sell the wiring between the two?

 

[PinballDaze]

Usually the interface connects straight to the coin mech. Here's a photo of a DE Rocky & Bullwinkle.

 

[Marble Madness]

Thanks for the photo it did make me laugh at how organised it was compared to mine!!! I think a tidy up of the wires is needed.

OK so I'm missing the connector between the interface and the coin mech also is this something you sell? I need the interface and connector.

Finally I've a feeling the operator who had this cut wires and changed things around to fit the coin control unit, so is there anyone with a good picture of the wiring from the playfield into the interface and then the interface to the coin mech for either SW or a LW3. I need to check that all the wiring hasnt been totally messed up by the original operator (I'm assuming the wiring and colours for the rocky and Bullwinkle might be slightly different). I can then follow the colours to change back.

Thanks @PinballDaze the help and advice is much appreciated

 

[PinballDaze]

I only have the interfaces.

May have to ask the forum for the cables.

Dave

 

[Marble Madness]

Thanks @PinballDaze I'm putting a wanted post next and will order the interface (or maybe 2) if someone can help with the cable.