No Longer Available DATA EAST LAST ACTION HERO

[G.pow]

Up for sale is my last action hero pinball machine.
The machine is in overall good working condition, the cabinet is in good shape, (see pics) i have had the legs and rails, powder coated to suit the theme. It has cabinet protectors as well, with all new castors etc. The playfield has been striped waxed and new rubbers etc but has now had a few games played on it since. I have installed cliffy protectors on the usual areas of wear. The ticked has had the new decal over and has been installed exact woth no ripples or air bubbles etc. I have the magnet driver board but this dose not work?
So i have just un plugged from the machine, the shaker motor works well all as it should. The game plays well all throughout, tho one of the switch tabs (the metal extender part the ball or ball gate touches) has come away on the top clear ramp. The switch still works but needs to be tweaked so the ball activates it.
I have installed a pin sound board on the machine and have the original one as well but dont thin if it worked or not? I have installed all L.E.D lights on the machine as well which look good. I also have the manual as well.

Looking £2,000.00 for it
Any questions please ask
Located in Gloucestershire area.

 

[G.pow]

Reduced price update!! if no response, it will go to ebay

Thanks.

 

[Spandangler]

eBay will probably be your best bet mate.
It’s generally considered rude to discuss prices on other people’s for sale threads. And I don’t like to be rude........
But I think on this forum a. LAH would generally sell for around £1500. Condition is everything though and that is a guide.

Good luck with your sale

 

[BigIan]

It does look lovely, unfortunately i'm at about 7 pins too many at the moment already or id be chatting

 

[steve brum]

Sell pin sound separate as though a fun game even an old stock in box wouldn't command big bucks

 

[G.pow]

Thats a good point, just thought someone may wish to change the music to the AC/DC music theme??

 

[huggers]

I was after one of these a while back but I've kinda spent all my money. I think they do tend to go for 1500 ish but tbf this does look a nice one. Good luck with the sale, fun game and an awesome licence

 

[steve brum]

game is loaded . data east were banking on the film not tanking

 

[Jazzbouche]

If you decide to split the pinsound I’d be interested. GLWS.

 

[Matt Adams]

Awesome game. I would never part with mine. Got to be worth around 2k with the pinsound board!

 

[Matt41226]

Seriously thinking of buying my first pinball machine.

I'm very much a newbie, so want something that doesn't need any work or very little.

How much work is it to fix the switch tab ?

 

[G.pow]

It wont be that mutch im sure. the switch works. it needs the bit the ball touches to make contact with the switch arm.

 

[James]

If it is appearing in a switch test @G.pow when you press it simply fettle it with a pair of plyers to raise the angle, then you can sell a perfectly working machine for literally 2 minutes work.

 

[Davey D]

As above. If the switch works, and it's just due to the wire needing bending slightly it's not worth leaving it, and selling as a faulty machine as it's such an easy fix

 

[ben76]

Doesn't the magnet bit do the lock on the ball for the crane?

- Ben

 

[Matt Adams]

No, there are 3 under the playfield the same as TAF, the ball is locked in the crane jib by a small solenoid which pushes a pin up through the base to stop it rolling out.