CV Multiball 3rd ball won't eject

[SeikoKid]

On high wire multiball, when the 2nd ball is locked the 3rd won't eject into the shooter lane. Nothing happens until a ball search where the 2 are released. Should I either achieve a third lock or start a new ball then it ejects again fine. Just on this one situation. Tested all switches. Highwire switches register find when each ball is locked

 

[AlanJ]

Sounds like a switch error.

 

[SeikoKid]

The 2nd ball lock switch for the high wire ?


edit - found it, thanks Alan, the 3rd switch had got knocked when I reassembled. and was shorting, but I didn't look fully as all 3 were testing ok.

Now woking perf

 

[Toxteth O'Grady]

We had this problem on our CV, the second ball wasn’t registering on the switch so I adjusted the position of the ramp to allow the second and third ball to register.

Adjust the position of the ramp by undoing the ramp nut with the badly drawn arrow on.