CPR mirror glass trim

Beowulfz07

Site Supporter
Jun 10, 2018
421
550
93
Wellingborough
Hi all,
Just thought I’d post about fitting a new CPR mirror glass as I have them for Whirlwind and WH20 and the existing trim doesn’t fit very well at all, in fact whirlwind was jammed solid as the top plastic had lifted off the glass in the machine which made it extremely difficult to remove.
So huge thanks to Andy Netherwood who sells a 3 piece set (2 sides and a top) of 1/8” trim which fits absolutely perfect and simply needs trimming to length with a sharp knife.
What a difference !
It fits perfectly, without being loose and the top lock still prevents it from lifting out of the speaker panel.
Hope this helps
 

Attachments

  • 82DADABB-6EEB-452B-A64C-C19A040BE180.jpeg
    82DADABB-6EEB-452B-A64C-C19A040BE180.jpeg
    167.9 KB · Views: 28
  • DDC9007D-30D4-4B30-85EF-A3BAA650FE5D.jpeg
    DDC9007D-30D4-4B30-85EF-A3BAA650FE5D.jpeg
    157.9 KB · Views: 29
  • 3BCE3CF3-095D-40CB-B146-2D100C0AB89F.png
    3BCE3CF3-095D-40CB-B146-2D100C0AB89F.png
    75.8 KB · Views: 23
  • CC12A754-A73D-4D36-B60D-DDD1534E75EE.png
    CC12A754-A73D-4D36-B60D-DDD1534E75EE.png
    93.3 KB · Views: 31
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
421
550
93
Wellingborough
Both CPR mirrors now installed and couldn’t be happier, they fit perfectly and easy to get in and out, job done 😃
 

Attachments

  • 84D15070-5177-4DD6-8EDB-A2D20DF6516C.jpeg
    84D15070-5177-4DD6-8EDB-A2D20DF6516C.jpeg
    118.3 KB · Views: 25
  • F7EE4232-897A-4A79-AFF3-424341D39891.jpeg
    F7EE4232-897A-4A79-AFF3-424341D39891.jpeg
    114 KB · Views: 20
  • F8D75AA7-5511-41FA-8E1A-7F6A26D8468A.jpeg
    F8D75AA7-5511-41FA-8E1A-7F6A26D8468A.jpeg
    132.7 KB · Views: 22

M4carp

Site Supporter
Jan 12, 2019
3,042
2,759
113
Pembrokeshire
Alias
Lostcause
Not in Stock though :(
I just heated the original trim up on my TAF and TZ and went on glass ok, just a bit tight. Tiny bit of light bleed maybe 1mm on the left and right trim as it doesn’t quite reach the graphics.