Coindoor coin slots lights

[arakissun]

Just a simple mod,nothing special,just wanted to share it.2 hours work.
Had some old and rusty coindoor from Williams 70's Time Warp.Have some spare LEDs and resistors.
Only the coin slots part was in really nice condition.Took and and throw the left frame and other metal parts.
Cut and paint in bronze a wooden peace to make the slots stay stable.
Cut three peaces and for each slot and put on each of them 4 white 3528 SMD plus one 330 Omh resistor and for the far right green slot 60 Omh,because this plastic is not original like the other and light must be stronger than the others.
To hold the three peaces used glue gun so if I think to do something in the future to be easy for disassembly.
Used 12v/2A power adapter.

The next step is to buy ready Disco Module that will emulate disco effects for each of the three slots so to have little life there.

 

[arakissun]

Put a ON/OFF switch for more elegant.
Put Disco lights emulation board-removed the stock LEDs and used the space for attach the board on the wooden panel.
Remove the original resistors that were after the stock LEDs,because my boards on the slots already had and solder each board to each emulation side on the board.
Put a isolation on the backside of the board.
The board have setting of different sequence(faster or slower) of flashing of the LEDs and every LEDs side have jumper where I can set the order of action of each LED group.

Pics and video are below.