Coin mech switch connection

[RudeDogg1]

Right just been rebuilding the coin door loom. The coin mech switches had undersized incorrect coloured wires connected to them incorrectly and not connected to the connector so going by the drawings I can't tell what's what.

Now does 2J2 switch column green brown connect to the rear or front tab?

 

[pinballmania]

Either.

 

[RudeDogg1]

Oh right wasn't sure if it had to be a certain way. Cheers andy

 

[pinballmania]

The diode is important as shown on the diagram but as it's not part of the switch, the switch is the same either way.

 

[RudeDogg1]

Oh right they didn't have a diode on I'll add one