changing backbox hinges

[Neil McRae]

any smart ways of doing this? I guessed in situ the the box up one side at a time?

thanks,
Neil.

 

[Wayne J]

Exactly that, one at a time, not too difficult - unless you've got some art blades in which need removing first.

 

[Sako-TRG]

Hinges can be removed together, but yes, one at a time I guess..... they are only required for lowering, its the two bolts in the back which hold the unit up.
Problem is if you have mirror blades they need dropped or art blades you best make a circular incision to get to the bolt head.

 

[Sako-TRG]

On the Stern PSU side, remember you only need to remove two small nuts from the PSU cover, one of which shown here above the fuse and the other is to the left of the photo near the board. This allows access to release the two bolts for the hinges inside the head unit

 

[Neil McRae]

Yeah got it I stupidly tightened the bolt too tight and sheered it so waiting for a new one!

Thanks !


Sent from my iPhone using Tapatalk Pro