What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Broken part on Data East Star Wars, best solution?

DanScu

Registered
10 Years
Joined
Sep 4, 2011
Messages
52
Hi guys
Just to ask if anyone could advise how I can fix this broken part on my DESW. The part is "Jabba's Bounty" and it must have got loose and broken off after a heavy shot. Any ideas?
Thanks
Dan






JABBA.jpg
 
Looks pretty much complete other than it’s come off it’s posts and turned around while sliding down the play field a Bit.

should be easy enough to lift it slightly and replace over the posts (thru the holes in the purple bit) and then re attach the nylon nuts, with washers if the holes are now to big

@steve brum is the king of star wars machines so might be able to help further
 
Thanks guys for the advice, fingers crossed. Will try and get a better picture of it as well as suggested.
 
Back
Top Bottom