What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold Bram Stoker's Dracula - now redecalled

Pinball UK

Registered
10 Years
Joined
Nov 20, 2011
Messages
218
Hi. I've got a BSD with a very nice playfield, no broken plastics. It's been with one private owner for 17 years and barely used for the last seven. The cab is faded and it's had a lockbar fitted, so I will be redecalling and fitting new side rails. It will be £1995, part ex considered (DMD machines only). No pictures available yet as I have to get the decals in and do the work.
 
How much for it as is, no repairing or doing the decals?
 
Thanks for your interest, but I've bought the decals, so I will be doing the work.
 
Here it is with the redecalling complete and playfield stripped, cleaned, polished and rerubbered. There is a set of as new legs to go on it when the decals have fully gone off. Would benefit from a new launch ball button. Also could do with one new slingshot underneath the prototype where the plastic ramp is attached
P1010762.JPG
P1010763.JPG
P1010764.JPG
P1010765.JPG
P1010766.JPG
P1010767.JPG
P1010768.JPG
P1010769.JPG
P1010752.JPG
P1010753.JPG
P1010754.JPG
P1010755.JPG
P1010756.JPG
P1010757.JPG
P1010758.JPG
P1010759.JPG
P1010760.JPG
P1010761.JPG
 
so this hasnt been fully shopped then just re-decalled - correct ?

Cheers Kev
 
I mean fully shopped Carl ie. full under playfield strip and clean rebuild etc
 
Back
Top Bottom