For Sale Bolt / Ball carrier

[Wayne J]

Bit of a good news / bad news post.

First the good news, the demand for these has far exceeded my initial expectations. So much so that I've had to borrow another printer to keep up with demand (with a 3rd double extruder printer arriving shortly). So wait times will be reduced when you order

I'm even in discussions with someone in the US to manufacture and sell them over there.
So if any of the people with webpages/shops over here are interested in stocking these get in touch.

The bad news is, that following a more in depth review of the costs in making these I'm going to have to increase the price slightly up to £15 each. (For all orders currently received I'll obviously honour the price at ordering). Who knew that using a set of kitchen scales to calculate the amount of material used didn't work out correctly (@Gonzo I hope you don't use those scales for baking ).

 

[Gonzo]

Bit of a good news / bad news post.

First the good news, the demand for these has far exceeded my initial expectations. So much so that I've had to borrow another printer to keep up with demand (with a 3rd double extruder printer arriving shortly). So wait times will be reduced when you order

I'm even in discussions with someone in the US to manufacture and sell them over there.
So if any of the people with webpages/shops over here are interested in stocking these get in touch.

The bad news is, that following a more in depth review of the costs in making these I'm going to have to increase the price slightly up to £15 each. (For all orders currently received I'll obviously honour the price at ordering). Who knew that using a set of kitchen scales to calculate the amount of material used didn't work out correctly (@Gonzo I hope you don't use those scales for baking ).

I did wonder why my cake tasted too buttery.

Congratulations mate

 

[Spandangler]

I did wonder why my cake tasted too buttery.

Congratulations mate

Very popular with the local smack heads though

 

[Wayne J]

2 more additions to the range.

Firstly, for Data East and other machines using an Allen key (JJP?)

The Allen key will stick out slightly, but at least you'll always know where it is! Will hold up to 6 balls

Secondly, a case which was specifically requested by someone in The States - a case for single ball EM machines. (Although it will actually hold 2)

It will hold all 4 long back box bolts, as well as the usual 8 leg bolts and all associated washers.

All 4 versions the same price - £15

 

[Wayne J]

Test fit with everything in it, nice and snug

 

[Sven Normansson]

This one for stern Sam and whitestar, data east,sega and jjp. I think we have a solution for just about every game except balls a popping and fireball...

 

[kevlar]

This one for stern Sam and whitestar, data east,sega and jjp. I think we have a solution for just about every game except balls a popping and fireball...

Apollo 13? . Seriously well done.

 

[Wayne J]

If you let me know what machine you want to order a case for, I will throw in a free keyring for your machine. ( The pics were mainly taking before I had finished cleaning them up)

The range is growing all of the time.

 

[Wayne J]

I'll have a limited supply of these for sale at Pinfest (on top of those already preordered).

Let me know if you'd want any setting aside for you.

 

[Wayne J]

End of Line Clearance!

With the things my new Bambu printer can do (which will be coming soon) I'm having a clear out of the last few carriers I'd printed

I've got:

9 for newer Stern backbox connectors, or a single long bolt,
6 for wingnut backbox connectors, &
1 for a single ball EM (4 long backbox bolts)

In the colours pictured

All of them 50% off - £7.50 each (as opposed to £15 each) Postage on top, but I will be at PBR this weekend if people want to to collect from there.

 

[Wayne J]

All of them 50% off - £7.50 each (as opposed to £15 each) Postage on top,

That's the last of the old stock gone, so the offer is now over

Can still print to order any of the designs in any colour (ish).