What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Expired Black knight 2000

  • Thread starter Thread starter Adam ackroyd
  • Start date Start date
Expired Due to no activity
A

Adam ackroyd

We have a good condition black knight
2000 for sale (west Yorkshire )
Could somebody please tell us a estimated selling price £
Any info would be appreciated .
Or offers .......
 
Condition is everything, post up some pics and you'll be more likely to get offers or have someone give you a rough idea on value :)
 
Didn't know how to post picks
But it's now on eBay
item no 281073892854
 
Just seen it Adam, did you manage to give it a check over as we discussed?
 
Pictures of the pf with the glass off are generally advisable as it's difficult to get an idea of condition with all the glare and reflections. I can see the right sling plastic is damaged and judging by the rubbers at the WAR lanes it's pretty dirty. Is there something wrong with the display....none of the pics have anything showing on either displays even though the machine is on?

Your start price is maybe the kind of money you could ask if it was a fresh restoration job with a cleared pf but for a standard BK2000 with damaged plastics and dirty your well high. If the display is shot then thats a crazy price as new ones aren't cheap!
 
£1490 without a 'make an offer' tag will probably result in a no sale. The game looks good enough, but the ad needs much better, high res, and up close pictures of every part of the playfield.
 
Just seen comments
Will take better closer photos
Add them eBay
Some photos were taken when machine was just switched on ,
Viewing is always welcome,
 
Is it me or is the backbox missing half of it's lighting? hmmm, looks like toasted connectors again!
 
Remove the glass and take (high res, up close) photos. People cant tell if there is wear or a reflection on the photo and may dismiss buying because of it. Also, pictures of the driver boards in the backbox would be a good idea to show people its 'true' condition.
 
Took a look at this today for Adam. Issues to note:

Cabinet body and artwork good but backbox grazed and a couple chunks of wood missing out of it.
Front legs pitted with some rust.
Playfield very dirty and mylar is lifting with bubbles all over.
Bit of playfield wear to left side drain lane and top right of upper playfield.
New rubbers required throughout.
Display is gassing.
Very small area of acid leakage on PCB behind batteries within backbox.
Small patch of missing artwork to backglass.
Two of the three test switches inside the coin door don't work (and so I couldn't run diagnostic tests).
The plunger needs a new spring.
There's a least two faulty switches.
Both slingshot plastics are broken.
3 slight dimples in lockdown bar.
Power switch under cabinet doesn't work.

Don't think it's one for me but understand the owner is open to offers for anyone looking for a project pin.
 
You must log in or register to reply here.
Back
Top Bottom