Complete Black Knight 2000 Playfield restore (Pic Heavy)

[Savage]

Another One done!

This was a massive job, not one but two, well 1 and a half playfeilds to do.
All inserts were removed and reseated.
Somethings I had to work with / contend with.

• Cracked inserts
• Mylar over almost everything, and this mylar was a b#tch to remove, as you will see in some photos of what it did when removed.
• Screen printing lifting off with the mylar
• lots and lots of touch ups
• lots and lots of masking
• lots and lost of clearing, sanding and clearing and sanding etc (not all touchups can be done in one go, this usually normal, but the amounts of times I had to do it on this, arghhhhhhh)

Supplied inserts had issues to, half were just not wanting to be peeled from their backing, where it left a furry opaqueness to the insert (when this happened I had to turf them and make my own)
And then I had three insert sticker (G, H, T) which were too small, so I had to remake these as well.

Anyway, lots was done.
Sit back and enjoy the before and after photos.


























After Photos