What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Bally Viking

  • Thread starter Thread starter MGV
  • Start date Start date
M

MGV

Hello all.....

It starts....:) i have soldered the new transitor and resistor in place and replaced the thumper solenoid.... when i switch game on the lights behind the backglass come on and stay on.... the lights on the playfield come on and then go off...nothing smells distressed :clap:

I have started to test voltages at TP's but on the AS2518-18 transformer board, i can not find the GND point,
Also test points 3,5,6 have had power wires taken from them.....it's taking time to trace this but should be sortable..

any ideas on the transformer GND location?

Thanks Mark
 
any ideas on the transformer GND location?

The end of R1 (the end marked R1) is quite convenient.
Not really the transformer ground, more the common neg of the rectifiers.

Rob
 
  • Like
Reactions: MGV
Back
Top Bottom