Bally Gilligan's Island for Sale
The good
It's a Bally Wiliams, I've added some LED's, new plunger rod since the earlier pictures, reasonably well polished lockdown bar, new rubbers. Took the playfield out, and vaccumed out the cabinet.
Coin door OK, I've touched up the front artwork so in a line-up it would look fine. Stainless legs, OK condition. All the ramps are good and I don't think there is any cracking. Cabinet solid without any nasty rot. New coin door lock. New flipper bats. Apron nice and clean, lower subway ramp clean.
The so-so & bad
I'm sure there's still a ramp/island issue. I don't think the island locks as it should, although I know the motor is fine and that works. Faded side art (normal), bleached out translite (pretty common), playfield wear, with some lines on the art but nothing that makes any difference to the way it plays. Some ghosting on inserts, a few broken plastics. DMD probably gassing out. Some of the connectors in the head are a bit tired, but there's nothing there causing any problems. Glass ancient and marked tired but unchipped at least!
So if you don't mind some niggles and want a machine to do some jobs on it's ideal as I'm not after stupid money. Starting at £1,800 and I'll reduce by £50 every week until it hits the bottom end price I have for it.
I'm over capacity by 1 or 2 and I don't want to have to break up a complete machine.
Link to picture album on Flickr, if I've missed anything you want to see, let me know. > pics here <
West Midlands, 5 mins from J3 M5, Martin's been here before.











The good
It's a Bally Wiliams, I've added some LED's, new plunger rod since the earlier pictures, reasonably well polished lockdown bar, new rubbers. Took the playfield out, and vaccumed out the cabinet.
Coin door OK, I've touched up the front artwork so in a line-up it would look fine. Stainless legs, OK condition. All the ramps are good and I don't think there is any cracking. Cabinet solid without any nasty rot. New coin door lock. New flipper bats. Apron nice and clean, lower subway ramp clean.
The so-so & bad
I'm sure there's still a ramp/island issue. I don't think the island locks as it should, although I know the motor is fine and that works. Faded side art (normal), bleached out translite (pretty common), playfield wear, with some lines on the art but nothing that makes any difference to the way it plays. Some ghosting on inserts, a few broken plastics. DMD probably gassing out. Some of the connectors in the head are a bit tired, but there's nothing there causing any problems. Glass ancient and marked tired but unchipped at least!
So if you don't mind some niggles and want a machine to do some jobs on it's ideal as I'm not after stupid money. Starting at £1,800 and I'll reduce by £50 every week until it hits the bottom end price I have for it.
I'm over capacity by 1 or 2 and I don't want to have to break up a complete machine.
Link to picture album on Flickr, if I've missed anything you want to see, let me know. > pics here <
West Midlands, 5 mins from J3 M5, Martin's been here before.





















