What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Bally Elektra elektra units display issue?

stevebm1

Registered
10 Years
Joined
May 26, 2014
Messages
1,698
Location
uk
Could a fellow Elektra owner please put their machine in test mode for displays,and see if all six digits count on the elektra units display please(you will need to remove the backglass and open the backboard to see it in reverse),mine is only counting 5 digits,not six,the one furthest left,looking from the rear is missing,I tried swapping the credit/ball in play display with it and it's not the displays as they both count all digits fine when used as credit displays
Whilst this is not an issue in gameplay,as it only uses the two centre digits,it would be handy to know if this is a wiring issue or normal behaviour

thanks in advance
 
Thanks Alan,another gremlin for me to investigate then,I may just get rid of the crappy idc connector and go for a proper molex then on that display
 
Back
Top Bottom