Addams Family Sound

[tuttiweb1]

Hi all,

If I swap out all three chips to play the Gold version of the pin, would I need to swap all three back if I wanted to go back to L7 eprom, or can I leave both gold sound chips in?

 

[tuttiweb1]

*typo correction*

 

[Paul]

It is possible to convert your regular Addams Family pinball to run Addams Family Gold game and sound ROMs.

Three new ROM chips are required- the Addams Gold game ROM, and two sound ROM chips. These chips will replace the chips currently in your game.

Old chips (regular Addams) removed are:
Game ROM U6 (on MPU board)
Sound ROM U18 (on MPU board)

New chips (Addams Gold) installed are:
Game ROM U6, revision LX3 (or 'home' version H-3) (on MPU board)
Sound ROM U15, revision L-1 (on MPU board)
Sound ROM U18, revision L-1 (on MPU board)

Installing Gold ROMs will enable some additional features, sounds, and display effects to your game. The only feature that cannot be used is the Extra Ball buy-in button. Addams Gold machines had this button installed under the plunger on front right side of cabinet. Regular Addams machines had no such button. It is possible to install the button in your game, but we don't recommend making the modification- it can adversely affect the value of your game.

All Addams Family Gold game play rules, features, sound effects, and display effects will be present after installing Gold ROMs in your regular Addams Game. No other modifications are necessary.

As far as i am aware, you would need to swap all three

 

[tuttiweb1]

Still seeking clarification... apologies I'm being a bit slow on the uptake here.

I know all three 'Gold' chips need installing to get the 'Gold' software experience.

My question is, how to go back to the 'Standard' experience. Can I get away with only swapping back out the Game (U6) L7 ROM, leaving the Gold Sound ROMS installed?

 

[drhex]

No, you need to swap all of them. Sound is different from the normal game iirc.