What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

1963 Williams Skill Pool

Special When Lit

Registered
Joined
Mar 22, 2012
Messages
66
Bought this in 2011 along with 3/4 of a Williams Friendship 7 (if anyone has a cab & mech board, let me know).
Never plugged it in, put it straight in the shed intending it to be 'next on the list'. Fast forward 8 years & I've finally got around to getting it back out.
It's had quite a few plays, but is in really good condition. Backglass (perspex) is 9.5/10, playfield 9/10. One bumper cap is missing the cab has been repainted & the knob from the ball lifter is missing.
Had a start on the backbox today. Cleaned & adjusted all the switches, stripped & cleaned the replay & match steppers as both were really gummed up with old grease. Started on the score reels, & apart from being dirty they looked like they'd never been touched since 1963.
More updates when I get chance.
 

Attachments

  • DSCF0931.JPG
    DSCF0931.JPG
    135 KB · Views: 23
  • DSCF0933.JPG
    DSCF0933.JPG
    129.1 KB · Views: 23
  • DSCF0934.JPG
    DSCF0934.JPG
    130.9 KB · Views: 22
  • DSCF0937.JPG
    DSCF0937.JPG
    156.2 KB · Views: 21
  • DSCF0938.JPG
    DSCF0938.JPG
    168.4 KB · Views: 20
  • DSCF0939.JPG
    DSCF0939.JPG
    158.7 KB · Views: 21
  • DSCF0940.JPG
    DSCF0940.JPG
    173 KB · Views: 18
  • DSCF0942.JPG
    DSCF0942.JPG
    134.5 KB · Views: 19
  • DSCF0943.JPG
    DSCF0943.JPG
    102.8 KB · Views: 18
  • DSCF0944.JPG
    DSCF0944.JPG
    118.1 KB · Views: 17
  • DSCF0948.JPG
    DSCF0948.JPG
    174.2 KB · Views: 16
  • DSCF0952.JPG
    DSCF0952.JPG
    150.1 KB · Views: 18
  • DSCF0953.JPG
    DSCF0953.JPG
    98.3 KB · Views: 19
  • DSCF0955.JPG
    DSCF0955.JPG
    130.5 KB · Views: 20
  • DSCF0956.JPG
    DSCF0956.JPG
    135.4 KB · Views: 18
Got a bit more done to the Skill Pool today. Finished the backbox, all bulb holders cleaned, backglass cleaned & re-assembled.
After that I got started on the mech board. Everything looked good, apart from the usual 3 core cable spliced onto the 50 year old original power cord & dirt everywhere. Took everything off & gave thewood a good clean, started to build it back up & realised I'd put the relay labels on upside down. Doh.
Rectified that & started cleaning& adjusting all the switches. Going to put a proper 3 core power lead on & earth everything when I get around to going to Wilco's & buying some cable. Then just got to clean & adjust all the switched on the Gottlieb style score motor & it'll be done.
 

Attachments

  • DSCF0964.JPG
    DSCF0964.JPG
    146.3 KB · Views: 7
  • DSCF0965.JPG
    DSCF0965.JPG
    159.1 KB · Views: 7
  • DSCF0966.JPG
    DSCF0966.JPG
    147 KB · Views: 7
  • DSCF0968.JPG
    DSCF0968.JPG
    157.6 KB · Views: 7
  • DSCF0969.JPG
    DSCF0969.JPG
    160.9 KB · Views: 7
  • DSCF0970.JPG
    DSCF0970.JPG
    157.8 KB · Views: 7
  • DSCF0975.JPG
    DSCF0975.JPG
    82.9 KB · Views: 7
Back
Top Bottom