Hi chaps, could someone measure the height of the holes in the cabinet for the legs please?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Whitewater Cabinet Rebuild
- Thread starter Drew.m
- Start date
OP
OP
Can anybody help with the leg bolt positions on a wh20 as I have measured my other machines and they are all different
Is your doner cab a Addams ?
If so both front and rear are identical.
Front from base to centre bottom hole 104mm.
Rear from base to centre bottom hole 55mm.
Hope that helps.
Rear from base to centre bottom hole 55mm.
Hope that helps.
OP
OP
Thanks that really helps, yes the donor is an Addams
OP
OP
OP
OP
That will explain why the old cabinets playfueld was too shallow
