What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Complete WH20 super minty

Hi Tony as Darren has messaged I use different filler to do different jobs. You want a filler that is strong, but sands easily to fill the scratches and flat areas. However that filler isn't ideal for edges and corners as it breaks easily if knocked. I use a specialist filler with fibre for the corners and edges, it is incredibly strong if knocked. You need to be a little careful if using car body filler some of it just isn't flexible enough for wood, it's a very different substrate compared with metal. I've had a bad experience with car body filler so don't use it anymore.

Chris - may I ask the brand of the fibre filler your using and can you get it quite easily?
 
Ok back box re build time first job earth braid and clean up all the powder coating for good earths
 

Attachments

  • IMG_5078.JPG
    IMG_5078.JPG
    102 KB · Views: 17
  • IMG_5079.JPG
    IMG_5079.JPG
    55.9 KB · Views: 15
  • IMG_5081.JPG
    IMG_5081.JPG
    62.8 KB · Views: 14
Looking fabulous, as expected. I have a question though... You've powder coated the backbox ground plane in white. Does that not affect the grounding?
 
IMG_5101.JPG Right this is the time it all starts to come together a few bits and bats to put on the playfield I normally fit the playfield fully re built but wh20 is a tricky bugger with all the ramps and the mini pf so ready for putting pf back in
 
IMG_5102.JPG IMG_5103.JPG Ok so that's the playfield in and wired up nice and neat I hat back boxes with wires all over
Topper fit the 12v feed for the controller board runs of the playfield harness so I didn't want to fit the topper till the playfield was fit no point having to take it back off for bulbs being out
 
IMG_5105.JPG Next job fit the boulders thanks to rudi for the custom paint job as you cant get white boulders at the min finished off with blue flasher domes also just offering the right ramp up apron and active shooter mod fit
 

Attachments

  • IMG_5105.JPG
    IMG_5105.JPG
    149.6 KB · Views: 12
IMG_5108.JPG IMG_5109.JPG IMG_5108.JPG Next thing mini playfield I have gone for the bumble option rather than the big foot but to be honest I am starting to regret this as fitting him is a real pita but will look great when done just waiting for the rude dog custom log and hands
 
Back
Top Bottom