What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

TOM - problem with noise

ababapanos

Registered
Joined
Dec 30, 2018
Messages
102
Location
GREECE
hello from this on the back of the cabine makes a noise like a hum

Can I do something because it bothers me?
 

Attachments

  • 52830901_391455758304651_1375506071598137344_n.jpg
    52830901_391455758304651_1375506071598137344_n.jpg
    134.2 KB · Views: 23
Have a look here was discussed and see link to pinside

 
Give it a smack with a piece of 2'x4'. You can try mounting the bolts with either felt pads or rubber washers.
 
My TAF one hums too, not loudly but louder than my TZ which is silent. Same fix?

This guy on Pinside with a TOM tried rubber washers and whacking it to no avail, and he fixed his by removing a metal bracket?
 
Check the lamination bolts,nuts iirc 4. If loose the laminations wiĺl hum.If not that try rubber mount washers on screws sholding tranny base
 
Last edited:
Back
Top Bottom