What's new

Taf Pic please??

Paul

Paul

Staff member
Joined
Oct 5, 2012
Messages
11,619
Location
South Wales
Alias
Toibs
Hi All,

Wondered if someone would be able to take a pic for me please of the Bottom right corner of their WPC Driver board please... Around the J132 - J135 area please.. (The smaller connectors). I thought they were all daisy chained, however it seems My loom labels are that bad i cannot make out which goes where, and Google isnt helping...

Many thanks
Paul
 
Let me know if you need to know anything else. Hopefully you can see what you need to from this?
 

Attachments

  • 15456042516992408617334176677003.jpg
    15456042516992408617334176677003.jpg
    99.3 KB · Views: 24
DanLewell said:
Let me know if you need to know anything else. Hopefully you can see what you need to from this?
Click to expand...

Dan you are a star, and thank you, however need to see the colours of the small connectors to know which goes where... I have two which are fully built, and one with just one wire on the left... After knowing which goes where :D

Thanks
Paul
 
J133 looks like just red and grey on its own.
J134 is in the photo and I'll do another photo of j135 in a sec.
 

Attachments

  • 1545606070478652771816421226061.jpg
    1545606070478652771816421226061.jpg
    95.5 KB · Views: 17
One last one i think (!!! Yes - Nearly there!)

Does anyone have a clear pic of the connections for the Thing lights which live on the Main TAF ramp please? Both ends... The top where the bulbs are and the 4 way square connector please.... i need to make up my own cable as this has been lost in the depths of time... Made up what i thought was correct going by various pics on the Web... alas.. isn't right (and yes i did include the Diodes!)

Thanks :D
 
Paul said:
One last one i think (!!! Yes - Nearly there!)

Does anyone have a clear pic of the connections for the Thing lights which live on the Main TAF ramp please? Both ends... The top where the bulbs are and the 4 way square connector please.... i need to make up my own cable as this has been lost in the depths of time... Made up what i thought was correct going by various pics on the Web... alas.. isn't right (and yes i did include the Diodes!)

Thanks :D
Click to expand...

@Paul I don't understand from your description which lamp(s) you want a picture of, explain and I'll get a picture to you.
 
Spandangler said:
The lamps mounted on the main ramp above the Thing ramp (little metal one)
Click to expand...

Thanks Gaz - yes this one...
1f0bbcf1b8baf457f009517f815090ba.jpg
 
Spandangler said:
The lamps mounted on the main ramp above the Thing ramp (little metal one)
Click to expand...

@Paul .....

The 4 pole connector has the following wire colours....

Red with Blue Trace and is not connected on lamp side of plug.

Red with Grey band and connected to same colour wire in lamp side of plug, this goes to the band end of the diode then the non band end of the diode to one side of the right hand green lamp.

Red with Purple band and connected to the same colour wire in the lamp side of the plug, this goes to the band end of the diode then the non band end of the diode to one side of the left hand yellow lamp.

Yellow with Purple band and connected to the same colour wire in the lamp side of the plug, this goes the other side of the yellow lamp, which then daisy chains to the other side of the green lamp.

HTHA1280A86-35DB-4C70-B044-46C12BD404FD.jpegEE4A8C04-9140-497E-9634-D1AD85E18C2B.jpeg24D74F4E-E3C0-4B56-8A9B-32185951080B.jpeg49C5D87C-9321-44F4-8A9B-2032838ADECC.jpeg
 
You must log in or register to reply here.
Back
Top Bottom