What's new

Found it! Spinner 515-5236-00 (Replaced by A-3460) Early Data East Robocop

Crewey

Crewey

Site Supporter
Joined
Dec 19, 2021
Messages
1,392
Location
CH4
The arm has snapped in the middle of mine o_O not seeing anything in the UK ??

According to Marco listing 515-5236-00 was replaced by A-3460 both are out of stock.

Would try a Williams too if they're rocking horse poo, looks similar enough:

1699974781924.png
large.jpg

Cheers
 
Last edited:
If it is same as used on baywatch I have one. Check the baywatch manual for part number and let me know.
 
Crewey said:
The arm has snapped in the middle of mine o_O not seeing anything in the UK ??

According to Marco listing 515-5236-00 was replaced by A-3460 both are out of stock.

Would try a Williams too if they're rocking horse poo, looks similar enough:

View attachment 237784 View attachment 237787
Cheers
Click to expand...
The same happened to the "Super Spinner" on my Data East Secret Service which I think is the same part. I drew a blank searching online. I'd also like to find a replacement.

Kevin
 
Asiapinball said:
If it is same as used on baywatch I have one. Check the baywatch manual for part number and let me know.
Click to expand...
Unfortunately this looks like 515-5553-00, which has an additional angle present.

1699979513965.png
 
I think you are right. It would also be quite difficult to extract from its mounting too as it is crimped at the end. Shame - good luck with the search.

1699981087070.png
 
Last edited:
@kevin_smith I've ordered a spare, if it fits in my Robocop I'll let you know
I think it's a case of essentially the exact same part having various serial numbers over the years and multiple pinball manufacturer references
 
Arrived shockingly quickly, Robocop working again.
@kevin_smith pm me your address if you want the spare mate, the arms are a mm or two shorter by comparison.

IMG_20231120_161328_BURST001_COVER~2.jpg
 
You must log in or register to reply here.
Back
Top Bottom