Space invaders pinball now breaking

[Body pop]

Bally space invaders pinballl
Ive spent a fortune on this but it needs finished
mpu board alltek
Now replaced sd board
New rectifier board
New rubber kit and flippers

Legs replaced with good used set
Coin door and lock down bar sourced from USA
New apron decal fitted

New 50 bumpers ,new spinner and some plastics replaced
Playfield is in superb condition !
Artwork is ok ,has been touched In
Loads of new connectors fitted
New solenoids fitted

This just needs a bit of time spent to finish
Some solenoids aren’t working or disconnected
Sound board was repaired ,but sound isn’t there again
,it’s booting up and starting ,
Now playing to a certain degree as updated below

£1000


May swap /part ex cash either .

 

[stevebm1]

how much cheaper with the original boards?

 

[AlanJ]

that would complement my Paragon, but I'm totally out of space (no pun intended). GLWS.

 

[Body pop]

I’ve been working at it today and I’m leaning on the side of keeping it again
The flippers are now working with the rottendog solenoid board ,but no hv
The old original solenoid board has the hv but left flipper doesn’t work !

 

[Body pop]

Back available ,I’ve saw something else I want
I’ve replaced the solenoid board and game is now starting and throwing ball out ,left flipper working too ,just the upper left is weak
Some solenoids replaced its playing without sound ,scoreboards are on ,just not right

£1000 as is ,I can possibly get a courier organised

 

[Body pop]

Anyone want this for 900 before eBay

 

[Bod]

Fond FOND memories of this table, when it was newly released. Unfortunately I lack the knowledge to repair it, otherwise would be interested. - Great backglass !

 

[Tombyrne]

That needs to go next to one of those 3 Alien’s currently for sale/sold. ( probably last longer)

 

[Body pop]

Anyone want to save this beast from breaking

 

[RudeDogg1]

Not sure I’d describe the play field as “superb condition” most of the insert writing is gone

 

[Body pop]

Oh Kay then. Thanks for that

 

[Sgt GrizZ]

Anyone want to save this beast from breaking

EBay

It will sell. Healthy market for project pins. There may be no takers on here but it is an iconic game. Be a shame to see it go to the knackers yard.

I appreciate sometimes 'some die so others live' but this old pin is far from beyond hope.

Sent from my mothership using Tapatalk

 

[astyy]

+1 Ebay

Keep your powder dry until the next £1 final value fee weekend, been two in Feb already.

 

[Body pop]

Cheers guys .

 

[RudeDogg1]

Oh Kay then. Thanks for that

Your welcome!

 

[Body pop]

And for the bump rudeboy ?

 

[steve brum]

Ebay and don't bung in the repro boards demand on here for those ! And you can post them cheaply!

 

[Body pop]

£700 guys with original boards only
Must be worth that to someone that can work on them

 

[AlanJ]

What's the issue with the original boards? pics?

 

[Body pop]

Here’s some pics
Battery damage to mpu and two tracks burnt on solenoid board (it still works)
I’d be quite confideng the oringinal rectifier could be working too
I was chasing my tail with connector issues

 

[AlanJ]

ooof - too much for me to tackle with those boards. What boards have you got in there currenty? It is probably more interest to me with the work you have done so far.

 

[Body pop]

Altek mpu
And rebuilt solenoid board
New rectifier board
If it was me I’d buy everything and then sell what’s not needed .

 

[astyy]

If you do go the Ebay route £1 selling fees this weekend (again!).

 

[Body pop]

Thanks mate ,I had just stuck it on
Though if anyone wants it here , then will sell here first

 

[astyy]

Thanks mate ,I had just stuck it on
Though if anyone wants it here , then will sell here first

I can see it. Did you mean to say "Dispatched with Royal Mail 1st Class"! Do you have a method in mind to ship it over to England?

 

[Tony]

99p start
Dispatched with Royal Mail 1st Class.?
Might be worth mentioning delivery options?

Look at this on eBay
pinball machine Bally space invaders ,arcade

 

[Body pop]

I see that’s been added at the bottom ffs
Thanks guys ,not sure why that’s addes when I’ve stated no postage

 

[Body pop]

Postage sorted and resisted

 

[AlanJ]

What would it cost to ship to UK, any idea please? and do you know of a company that could do it, many thanks. Alan.

 

[Atlantis]

Transland would do it if on a pallet 100 quid in 2/3 days