Sorry for the off topic post but can anyone recommend a company that cuts clear acrylic. Its to cut panels and a base to make a display box.
Done a bit of research online and quite a few out there but hoping for recommendations of a company that someone has used. Was going to buy a pre made one (as recommended by Scottydoesntknowit ) but these are supplied to be screwed together and would prefer to have glued/bonded edges. As the edges need to be straight for glue/bonding it would appear that laser cutting is the best option. Largest panel is 518x780mm
Also looking at getting some profiles cut to make some small display stands.
Cheers Tony
Done a bit of research online and quite a few out there but hoping for recommendations of a company that someone has used. Was going to buy a pre made one (as recommended by Scottydoesntknowit ) but these are supplied to be screwed together and would prefer to have glued/bonded edges. As the edges need to be straight for glue/bonding it would appear that laser cutting is the best option. Largest panel is 518x780mm
Also looking at getting some profiles cut to make some small display stands.
Cheers Tony
