What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

No keys help please

Then you can get to the key on the back of the coin door and throw it as far away as your chucking arm will take it.

Then realise it's the same key as you need for the head. Start walking in the direction you just threw the key...

??
 
Leave the lock on the coin door untill you get home . Unscrew the lock on the head , take head bolts out , if it has any and just fold head down etc etc .
There nothing worse then someone watching you when you drilling a lock out for the first time saying you can do it and then you don't :rofl: been there done that and have the T-shirt ;)
 
Happy days, much better than expected, minimal acid damage that has not touched the board. Neutralised.
Right cannon might reset to position in test but will check that tomorrow. Apart from that looking good with no hacks anywhere.
It’s in very good original condition and a bargain I think. Thanks for all the input?
FC33D911-B980-4351-8A93-B02FB94E8CCD.jpeg
A4964B72-DD9E-462A-AB2D-03DE32DE207B.jpeg
B4E7125A-8484-4286-AC80-757FBF8B84C7.jpeg
79B2898F-3A5A-4D4D-B0E7-7FC558C2C08B.jpeg
2476CB7D-3ABD-411A-B0D6-9162F0FE2D4D.jpeg
3D93E038-EA4F-4514-8FF4-04FB7C077FF1.jpeg
 
Yes very nice looking machine :thumbs:

But ...... I think we all want to know did you drilling the lock out when you picked the machine up or when you got back in that nice safe garage ;)
 
Yes very nice looking machine :thumbs:

But ...... I think we all want to know did you drilling the lock out when you picked the machine up or when you got back in that nice safe garage ;)
???
Drilled out in the nice safe private garage☺️
Went well with a bit of 3in1, would have been too much pressure but next time I will now I’m not a virgin?
 
All working so far, cannon reset back to position but solenoid did not work. Took cover off and wire had come away. Soldered back and all good.
0297CDBD-E1C3-47B3-9CE7-8C7C28E4427E.jpeg
 
Back
Top Bottom