Hi All,
I have tested the fuses on the rectifier board and they all work, but they appear to be different amps to those listed in the manual and on the board. F1 says it should be a 10 amp fast blow but a 20 amp is currently fitted, F4 should be a 5A but a 7/8A is fitted. I ordered some fuses but although they are the correct amp they are different volts: the F1 fuse should be 10A 32V 3AG according to the Strikes N Spares manual - the one I've just got is 10A 250v. Is that going to work? Thanks! Ed
I have tested the fuses on the rectifier board and they all work, but they appear to be different amps to those listed in the manual and on the board. F1 says it should be a 10 amp fast blow but a 20 amp is currently fitted, F4 should be a 5A but a 7/8A is fitted. I ordered some fuses but although they are the correct amp they are different volts: the F1 fuse should be 10A 32V 3AG according to the Strikes N Spares manual - the one I've just got is 10A 250v. Is that going to work? Thanks! Ed
