Flintstones resetting - Static precautions.

[Stags6969]

Hi

I’ve got a problem with my Flintstones resetting intermittently when operating both flippers.
I’ve read the PinWiki and I’m going to go through the recommended steps, hopefully not having to rebuild the 5v unless absolutely necessary.
What static precautions do I need to take when I’m reseating the plugs and doing any soldering that is required.

Thanks

 

[johnwhitfield]

Before going down the rebuild route. Try reseating the wires in the back box. From previous experience this solves the problem more often than not.

 

[ronnie63]

And the transformer plugs

 

[Stags6969]

Cheers guys.
Reseated all plugs and tightened up the driver board mounting screws, as most were loose.
Not missed a beat today and finally cracked the Billion