What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

ColorDMD LED help

  • Thread starter Deleted member 2463
  • Start date
D

Deleted member 2463

Folks,
As you might know I'm a fan of the LED version of ColorDMD. But there is one downside. The pixels when not in use are quite in your face. I think I have the answer which is to put a smoke/grey perspex panel infront of it rather than a clear one. That way when the detail of the LED panel will be camouflaged.

Anyone able to knock up a panel that would fit ? @replicas you knocked up some clear ones for me can you do one that will hide panel dots? :)

Image attached shows the issue well.1522220f20e47782fd4035f14322b792d266d2fb.jpg

Neil.
 
Are you using the Clear screen Neil? Was suggested to me by Randy to order the Clear screen when installing in a Spike Machine - Not sure if that applies to all, or if it would make a difference??
 
I've got 2 games with anti-glare DMD plastics in and they're great at stopping the reflection from windows or screens behind you. I'd expect they're also good at defusing the LED dots a little too, but haven't tried i because i'm an LCD ColorDMD DotsXL kinda guy.

Try this lot: https://www.simplyplastics.com/cata...-glare-extruded-acrylic-sheet/c-24/c-84/p-303

Pinball News also did a thing about them (albeit not this supplier, but probably the same material): http://www.pinballnews.com/learn/antiglare/
 
yes I'm using clear, hence you see the individual detail of the dots as in the picture above. I think if you have a shaded one you will still get the LED but without the detail of the dots. Tonight I'll take a picture and demonstrate with my RunDMD which has the same problem but solved by a grey/smoked piece of perspex.
 
Could be a good mod as that was main thing I didn't like about LED. Also bit too bright for me.

I never thought of using some sort of tinted perspex - kind of like adding sunglasses:cool:
 
Monkeyboypaul said:
I've got 2 games with anti-glare DMD plastics in and they're great at stopping the reflection from windows or screens behind you. I'd expect they're also good at defusing the LED dots a little too, but haven't tried i because i'm an LCD ColorDMD DotsXL kinda guy.

Try this lot: https://www.simplyplastics.com/cata...-glare-extruded-acrylic-sheet/c-24/c-84/p-303

Pinball News also did a thing about them (albeit not this supplier, but probably the same material): http://www.pinballnews.com/learn/antiglare/
Click to expand...

Thanks all -

ok ordered a couple of them to test, not sure it will solve the issue but the low glare I need anyway :)

If anyone can supply this I'd really be interested .
 
You must log in or register to reply here.
Back
Top Bottom