Best Glue for System 11 Ramp Repair

[DRD]

I have a thinspot that may fail in the future. I was going to apply something to thicken and strengthen the ramp. It also has an entrance crack that I will make a Cliffy for.

Was thinking of using this ...

http://www.go-araldite.com/products/epoxy-adhesives/araldite-crystal-2-x15ml-tube

Any thoughts pls ? A new main ramp and left hand Cliffys not currently available for Transporter The Rescue.

 

[RudeDogg1]

Yeah an epoxy is the way I would of gone

 

[astyy]

Fwiw Mark-Freeplay40 (who knows a bit about ramps) recommended Scigrip 16 to me but I couldn't find it over here at the time
https://www.amazon.com/SCIGRIP-10315-Acrylic-Cement-Low-VOC/dp/B003HNFLMY

 

[Sgt GrizZ]

Wasn't Freeplay40 doing the Transporter ramp? Or did I imagine that [emoji848]

Sent from my D5833 using Tapatalk

 

[astyy]

Wasn't Freeplay40 doing the Transporter ramp? Or did I imagine that

Yer, I think he's on them at the moment.

 

[insx]

Yes, 2 part clear epoxy is what I've used, specifically this one:

http://www.jb-weld.co.uk/j-b-weld-epoxy-syringe/j-b-weld-kwikweld-quick-setting-epoxy

This one does come out a bit yellowy.

 

[DRD]

I am giving this one a try. I have done two test splats on an old ramp.



One splat onto smooth ramp, the other onto a roughened surface. It looks clear to me but only time will tell.

I then attacked it with a thin screwdriver. I think that roughing up the surface is the way to go.

 

[insx]

Looks clearer than my stuff