What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold £450 Project Williams F14 Tomcat

8bit-1up

Registered
Joined
Jul 20, 2020
Messages
281
Location
Bristol
I’ve sold this pin twice now, but both original buyers had to pull out for a mixture of reasons. I’ve been sat on the fence about just keeping it and restoring it myself, but I’m just not going to have the time to add this one to the mountain of pins I’m currently restoring already.

£450 takes it!

First one to put the money in my bank gets it! I’m using the money to finance a recent arcade purchase, so I’ll need the money buy this Friday.

This pin has been stored in a shed for over 20 years, so will need someone who has the time and skill to bring it back to life. This is not a project for a beginner, so be warned!

If it doesn’t sell on here then I’ll relist it on eBay tomorrow.

It’s a complete pin minus the legs and blue beacon.

Condition:
1. Rust throughout machine
2. Veneer lifting from backbox and back of cabinet
3. Mylar lifting from playfield
4. Battery damage to MPU
5. It’s probably the worst condition machine I’ve bought so far!!

Sold as seen

Viewing welcome

Location Bristol
6803F079-2A50-4AB7-9E5B-3FE97B9A61E9.jpeg
3C5FF45D-D785-460C-8F24-2ADCD5FC939D.jpeg
FBAABD94-41F1-4FC9-9C69-DC74FB5A0E28.jpeg
75214B03-693D-42CC-9E8F-7A7E63949A6B.jpeg
0371FC5A-4C68-4C29-88B1-AE25AC3BE4D3.jpeg
8DE4A518-1B1A-42E9-8905-B562446815D6.jpeg
64BE89BA-C335-49F8-B788-32F7D941B324.jpeg
E60ABFA7-7C6B-4226-ADDC-6B9905F5F297.jpeg
A687CA9E-F661-4769-8A37-EF3349FE331D.jpeg
 
Last edited:
I’ve sold this pin twice now, but both original buyers had to pull out for a mixture of reasons. I’ve been sat on the fence about just keeping it and restoring it myself, but I’m just not going to have the time to add this one to the mountain of pins I’m currently restoring already.

£450 takes it!

First one to put the money in my bank gets it! I’m using the money to finance a recent arcade purchase, so I’ll need the money buy this Friday.

This pin has been stored in a shed for over 20 years, so will need someone who has the time and skill to bring it back to life. This is not a project for a beginner, so be warned!

If it doesn’t sell on here then I’ll relist it on eBay tomorrow.

It’s a complete pin minus the legs and blue beacon.

Condition:
1. Rust throughout machine
2. Veneer lifting from backbox and back of cabinet
3. Mylar lifting from playfield
4. Battery damage to MPU
5. It’s probably the worst condition machine I’ve bought so far!!

Sold as seen

Viewing welcome

Location Bristol
View attachment 183550View attachment 183551View attachment 183552View attachment 183553View attachment 183554
View attachment 183555View attachment 183556View attachment 183557View attachment 183558
Whats the playfield like can't really see in any of the photos ??

Cheers

Kev
 
Back
Top Bottom